Produkte

Produkt Kategorien

Titelseite

Toroidaler nanokristalliner Kern mit hoher Permeabilität

Toroidaler nanokristalliner Kern mit hoher Permeabilität; Die Beschichtung des nanokristallinen Magnetkerns erfolgt im Hochtemperatur-Epoxidharz-Pulversprühverfahren mit einer Schicht von 0,2 bis 0,7 mm (je nach Produkt) auf der Oberfläche des Kerns, die als Isolierschicht des Kerns dient und eine gewisse mechanische Festigkeit aufweist.

Kategorie:

Nanokristalline Gleichtaktkerne

Email: info@jchncores.com

Jetzt konsultieren

Kontakt

Beschreibung des Produkts

Introduction:

High Permeability Toroidal Nanocrystalline Core does not have mechanical strength ,it's not suitable to wind directly on it. So it will usually pack by plastic case or by epoxy resin spraying.

The nanocrystalline magnetic core coating adopts high temperature epoxy resin powder spraying process, with a layer of 0.2 ~ 0.7mm (depending on the product) coating on surface of the cores, which is used as the insulating layer of core and has a certain mechanical strength.

Typical Application：

New energy applications (PV lnverter, wind driven generator, EV charging station)
Consumer Appliance(TV, AC, computer, game console)
Medical equipment (MRI machine, ventilator)
Other electronics(Server power supply, UPS, Railway)

Performance Characteristics：

High Bs, high μi	High Bs (1.2T), high μi (>80000), and high anti-saturation ability, can reduce the core’ s volume effectively
Excellent frequency property	Excellent permeability characteristics in a wide frequency range
Stable temperature characteristic	The performance change rate is ±10% during temperature -40°C~150°C
With high broadband property	Suppress 150kHz~300mHz conduction and radiation interference
Low magnetostriction coefficient,low noise	Saturated magnetostriction coefficient is close to zero λs≈0

Product Specifications:

JCHN P.N	Core dimensions				Iron cross section	Mean path length	Weight	AL(10 kHz ) ±35% μH	AL（100 kHz） ±30% μH
	Core dimensions OD x ID x HT mm	Finished core size			Iron cross section	Mean path length	Weight
	Core dimensions OD x ID x HT mm	OD	ID	HT	AFe cm2	lFe cm	mFe g
JC-0904-C10	9×6×4	9.6	5.4	5.6	0.05	2.36	0.9	25.4	5.9
JC-1205-C10	12×8×5	12.6	7.4	5.8	0.08	3.14	1.8	30	7.5
JC-1407-C10	14×10×6.5	14.5	9.2	7.2	0.1	3.74	2.9	17	8
JC-1606B-C10	16 x 12.5 x 6	16.6	11.8	6.8	0.08	4.48	2.8	16	5.5
JC-1605-C10	16×10×5	16.8	9.2	5.8	0.12	4.08	3.6	33	9
JC-1608-C10	16×10×8	16.8	9.2	8.8	0.19	4.1	5.7	62.8	14.3
JC-2007-C10	20×13×6.5	20.8	12	7.3	0.18	5.2	6.9	38.4	9.4
JC-2308-C10	23×16×8	24	15.2	9	0.22	6.1	10	45.6	11.4
JC-2508-C10	25×16×8	26	16	9	0.29	6.4	14	36	13.6
JC-2512-C10	25×16×12	26	15	13	0.42	6.4	20.3	65.5	20
JC-3010-C10	30×20×10	31	19	11.3	0.4	7.9	23	60	16